V500 Composition/Information on Ingredients
No hazardous ingredients.

HAZARDS IDENTIFICATION
Not regarded as a health or environment hazard under current legislation.

FIRST AID MEASURES
Inhalation - Move the exposed person to fresh air at once. Get medical attention if any discomfort continues.
Ingestion - Never make unconscious person vomit or drink fluids! rinse mouth thoroughly. Drink plenty of water. Get medical attention if any discomfort continues.
Skin Contact - Remove affected person from source of contamination. Get medical attention if irritation persists after washing.
Eye Contact - Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse at least for 15 minutes. Get medical attention if any discomfort continues.

FIRE FIGHTING MEASURES
This product is not flammable. Use fire extinguishing media appropriate for
surrounding materials.

ACCIDENTAL RELEASE MEASURES
Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place
into containers. Flush area with plenty of water. Do not contaminate water sources or sewer.

HANDLING AND STORAGE
- Store between 0º and 40ºc
- Protect from water store under cover if possible.

EXPOSURE CONTROL/ PERSONAL PROTECTION
Ingredient Comments: OES- Occupational Exposure Standard

Engineering measures: Provide adequate general and local exhaust ventilation.

Eye Protection: If risk of splashing, wear protective goggles or face shield.

Other protection: Wear appropriate clothing to prevent any possibility of skin contact.

Hygiene measures: DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Wash promptly if skin becomes wet or contaminated. Promptly remove any clothing become contaminated. Use appropriate skin cream to prevent drying of skin. When using, do not eat, drink or smoke.

PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Liquid
Colour: Colourless toLight Yellow
Odour: Slight Odour
Relative Density: 1.055 typical @ 20ºC
Flash Point (ºC): min. 252ºC
Viscosity: 500 cSt at 40ºC

STABILITY AND REACTIVITY
Stable under normal temperature conditions.
Avoid excessive heat for prolonged periods of time.
Fire Creates: Carbon Dioxide (CO2) and Carbon Monoxide (CO)
Materials to Avoid: Strong oxidizing substances.

TOXICOLOGICAL INFORMATION
Inhalation - may cause irritation for respiratory system.
Ingestion - may cause discomfort if swallowed.
Skin Contact - may cause sensitisation by skin contact.
Eye Contact - dust may cause transient irritation.

DISPOSAL METHODS
Dispose of waste and residues in accordance with local authority requirements.

REGULATORY INFORMATION
Risk Phrases: Not Classified
UK Regualtory Ref.: Health and Safety at Work Act 1974.
EU Directives: System of specific information relating to Dangerous Preparations 2001/58/EC
Statuatory Instruments: Chemical (Hazard Information and Packaging for Supply) Reg. 2002 (CHIP3)
Approved Code of Practce: Classification and Labelling of Substances and Preparations Dangerous for Supply.
Guadiance Notes: CHIP for everyone HSG(108). Workplace Exposure Limits EH40

The V1000 Specification

V1000 COMPOSITION/ INFORMATION ON INGREDIENTS

FIRST AID MEASURES
Inhalation - Move the exposed person to fresh air at once. Get medical attention if any discomfort continues.
Ingestion - Never make unconscious person vomit or drink fluids! Rinse mouth thoroughly. Drink plenty of water. Get medical attention if any discomfort continues.
Skin Contact - Remove affected person from source of contamination. Get medical attention if irritation persists after washing.
Eye Contact - Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse at least for 15 minutes. Get medical attention if any discomfort continues.

FIRE FIGHTING MEASURES
This product is not flammable. Use fire extinguishing media appropriate for surrounding materials.

ACCIDENTAL RELEASE MEASURES
Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place in to containers. Flush area with plenty of water. Do not contaminate water sources or sewers.

HANDLING AND STORAGE
- Store at ambient temperature.
- Protect from water Store under Cover if possible.

EXPOSURE CONTROL/ PERSONAL PROTECTION
Ingredient Comments: OES- Occupational Exposure Standard
Engineering measures: Provide adequate general and local exhaust ventilation.
Eye Protection: If risk of splashing, wear protective goggles or face shield.
Other protection: Wear appropriate clothing to prevent any possibility of skin contact.
Hygiene Measures: DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Wash promptly if skin becomes wet or contaminated. Promptly remove any clothing become contaminated. Use appropriate skin cream to prevent drying of skin. When using, do not eat, drink or smoke.

PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Liquid
Colour: Amber
Odour: Characteristic
Relative density: 0.920 Typical @ 20ºC
Flash Point (ºC): min. 290ºC
Viscosity: 1,000 cSt at 40ºC

STABILITY AND REACTIVITY
Stable under normal temperature conditions. Avoid excessive heat for prolonged periods of time.
Fire Creates: Carbon Dioxide (CO2) and Carbon Monoxide (CO)

TOXICOLOGICAL INFORMATION
Inhalation - May cause irritation for respiratory system.
Ingestion - May cause discomfort if swallowed.
Skin Contact - May cause sensitisation by skin contact.
Eye Contact - Dust may cause transient irritation.

DISPOSAL METHODS
Dispose of waste and residues in accordance with local authority requirements.

REGULATORY INFORMATION
Risk Phrases: Not Classified
Safety Phrases: P13 Safety data sheet available for professional user on request.
UK Regualtory Ref: Health and Safety at Work Act 1974.
EU Directives: System of specific information relating to Dangerous Preparations 2001/58/EC
Statutory Instruments: Chemical (Hazard Information and Packaging for Supply) Reg. 2002 (CHIP3) 
Approved Code of Practice: Classification and Labelling of Substances and Preparations Dangerous for Supply.
Guidance Notes: CHIP for everyone HSG(108). Workplace Exposure Limits EH40